- Home
- LED strips
- LED strips 3014
LED strips 3014
LED 3014 Ribbons
SMD 3014 is very often called the "fire crystals". Such a name is not accidentally stuck to this led tape. It has an interesting feature, if you step back a few paces from the tape, you can not see the individual LEDs, they merge (the density reaches 240 pieces per meter) in a single continuous bright line, so bright, as if it dashed a laser. Hundreds of centimeters is enough to LED Strip 3014 gave a luminous flux equal to 2400 Lumens. These led-tapes compete not so much with incandescent bulbs, as with their "brothers" - SMD 3528, 5050 and 5630. And surpass them in many characteristics. Most likely you have already wanted to buy LED Strip 3014, but still familiarize yourself with its parameters. What gives them the opportunity to shine so strongly that a meter will easily replace a 120W light bulb? It is, of course, the crystal on the basis of which it is created. Its dimensions are not big, just 3 millimeters by 1.4 millimeters, but because of innovative solutions, this crystal is unique among modern diodes. In order for the 240 LEDs that make up the meter to work at full power you need 19.2 watts. For this reason you will not need a standard transformer, which is used in the case of, for example, SMD 5050, but a more powerful 12-volt power supply. We certainly have one and you can find it in the appropriate section. Note that the LED strip 3014 buy without LED profile with light-scattering cover will be your mistake. For this led-tape it is desirable that the light scattered more smoothly, did not bat an eye, and the loss in light output will be minimal, so do not worry about how the cover in this regard will affect. LED tapes 3014 in the installation for those who have already dealt with led-tapes, will not create problems. Mount on the adhesive strip on the back, cut off only where there are "scissors", and this is not less than five centimeters, which will be six LEDs. Do not forget that if the air in the room in which you have planned the installation of LED lighting, is constantly humid, then you are suitable degree of protection or IP54, or IP67, or IP68, but not IP20. In the temperature range from -40 to +60 any strip will do.
Автор: LEDProm