WiFi controller RGB 12A mini

The presented controller is powered by a 12V DC power supply, connected via a 5.5mm connector. Amplification of the radio signal can be achieved with an amplifier. Management is carried out using an Android smartphone (with the Magic Home software installed on it). With this controller, and thanks to the constant, dynamic modes, quite a few color combinations of light can be achieved. 15 built-in lighting programs will make it possible to deploy a full-fledged lighting show! This is a high-quality accessory for adjusting the color and lighting mode of the RGB LED strip. The memory of this RGB controller stores the last program that was used before the power was turned off. When buying a controller of the required power, we recommend taking into account the power consumption of the ice tape W / m, since each RGB controller is endowed with a certain power. It is allowed to connect 15 meters of ice tape with a power of 14.4 W/m or 30 meters of a tape with a power of 7.2 W/m to this 12A controller. To connect a longer tape, use RGB signal amplifiers. The controller has the following functions: on / off, brightness adjustment, setting a specific color, setting the activity system (glow, sparkle, transfusion) and setting the speed of the mode. RGB WI-FI controller mini 12 A 144 W is able to control: The color and brightness of the glow of the diode backlight The glow mode The color change Turning the backlight on / off Pluses of the presented RGB controller: Some service modes are already predefined in the memory. Using the touch ring, you can choose the right color for the glow of the tape. RGB Connector 4pin Father for connecting to the tape is included